Central Convencional de 6 zonas UNIPOS FS4000/6

2 Baterias 12V/4Ah
2 Saídas Controladas
Módulo opcional com 4 saídas relé + RS485 para comunicação com outras centrais e painel repetidor
Dimensões: 313x218x85 mm
IP40
Linhas de Entrada de alarme:
– Numero máximo de detetores por linha: 32
– Ligações: 2 Fios
– Resistência Máxima na linha: 100 Ω

Corrente de disparo:
– Falha: 0 – 6 mA
– Modo Ocupado: 6 – 16 mA
– Condição de disparo de fogo: 16 – 80 mA
– Curto circuito: > 80 mA

Saídas supervisionadas em condição de fogo:
– Quantidade: 2
– Tipo: potential, relé com controlo independente
– Caracteristicas eletricas: (19-27.5)V DC/1A

Saídas de relé em condições de fogo:
– Numero: 2
– Type: potential-free,1 switching, 1 NO
– Caracteristicas electricas: 3А/125V AC, 3A/30V DC

Sa´das de relé para condições de falha:
– Numero: 1
– Tipo: Contacto seco, Comutado
– Caracteristicas eletricas: 3А/125V AC, 3A/30V DC

Saídas de relé para condição de falha:
– Numero: 1
– Tipo: Não monitorizadas com activação por curto circuito
– Carcteristicas eletricas: 5 VDC em condição normal de estado: aberto / 0 VDC em modo de activação

Performance:
– Control over fire alarm lines and controllable outputs for fault conditions (short circuit and interruption) and automatic reset.
– Detection of removed fire detector and automatic reset.
– Identification of manual call points.
– LED indication for alarm state and emergency.
– Delay of outputs for fire condition with time period of 1, 2, 3, 4, 5, 6 or 7 minutes after fire condition is registered.
– Option for ‘LOGICAL AND’ realization of two fire alarm lines.
– Duty Mode condition with direct activation of Fire Condition 2nd Stage ” for two fire alarm lines.
– Status Indication of the device for data transmission RS485.
– Option for switching on/off interface RS485 communication.
– Built-in sounder for fire condition – one tonal, continuous, can be switched off.
– Built-in sounder for fault condition – one tonal, discontinuous, can be switched off.
– Test mode for fire alarm lines.
– Disabling fire alarm lines.
– Disabling outputs for fire condition.
– Expanding the options by means of extra relay outputs for fire condition for each line and built-in RS485 for operation in a local network.
– Input for remote Reset fires operation;

Indications of registered events:
– Light indication: LED
– Sound: Built-in buzzer

Power supply:
– Voltage: (100-240)V AC
– Frequency: 50/60 Hz

Backup batteries:
– Battery type: lead, gel electrolyte
– Number of batteries: 2 pcs
– Nominal voltage of the backup battery: 12V
– Nominal capacity C20: (7,0) Ah
– Charge voltage: 28V DC

Operation in Duty mode upon interruption in main power supply:
Lines – 24V / 1,2Ah – 24V / 4,5Ah – 24V / 7,0Ah
2 lines – 32 h – 120 h – 180 h
4 lines – 24 h – 98 h – 140 h
6 lines – 20 h – 80 h – 110 h
8 lines – 16 h – 68 h – 90 h

Consumption on backup batteries supply:
– Configuration of 2 lines: < 35 mA at 24V DC
– Configuration of 4 lines: < 45 mA at 24V DC
– Configuration of 6 lines: < 55 mA at 24V DC
– Configuration of 8 lines: < 65 mA at 24V DC

Power supply to external devices:
– Voltage: (19-27)V DC
– Maximum current value (including current of contr.outputs): 1,2A

Fuses:
– Main supply 230V: 4.0 A
– Backup battery: 6.0 A
– Power supply to external devices: 1.85 A automatic
– Monitored outputs: 1.1 A automatic

Dimension: 304mm x 222mm x 94mm
Weight (backup batteries not included): 0.98 kg